1. Installation

(1) Installation

Wood chipper can be installed on the concrete or steel structural support foundation, and fixed by land bolt. In order to open cover to replace rotary blade and assemble and dismantle bottom blade base, must according to the size supplied by “installation foundation sketch up”, and ensure there is enough space.

(2) Triangle belt’s Installation

A) Before installing the triangle belt, in order to load the triangle belt conveniently, the space between the belts must be reduced suitably. DONOT force to install with iron rod, preventing of damaging triangle belt.

B) Inspect two wheels end surface's straight lines with the straightedge, guarantee two wheels end surface in the identical plane.

(3) Triangle belt’s tension inspection

A) Adopting to press the lax side, check the bobbin to inspect the degree.

B) After machine 2-3 hours full-load running, check the V belt tension rate, and carry on essential regulation.2. Feeding device

The belt conveyor or vibrating feeding machine supply the material evenly to the chipper.

3. Discharging device

Discharging device has many kinds of forms, such as air-flow transportation, the chain type trigger transportation, belt conveyor, bucket elevator transportation etc. But anyway, the discharging quantity should be according to production arrangement. That is the cuted wood chips should be discharged promptly to avoid of stock. jam.  If choosing the air current transportation, this pointed must be paid much more attention to.